HLP

Máy khử khoáng HLP là thiết bị cấp nước máy phổ biến nhất, đáp ứng tất cả các yêu cầu của bất kỳ phòng thí nghiệm hiện đại nào về nhu cầu nước phù hợp cho mục đích phân tích và dụng cụ. Nước thu được có độ dẫn điện dưới 0,06 µS / cm đáp ứng các yêu cầu của: PN-EN ISO 3696: 1999, ASTM, CLSI, EP. Nước thu được có thể được sử dụng để phân tích thiết bị AAS, ICP / MS, IC, HPLC, GC (tùy thuộc vào kiểu máy).

 

---

HLP Smart

Cat. no.: DH-0004-00

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 4-4,5 dm3/h.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 5

Cat. no.: DH-0005-00

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 5-7 dm3/h.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 5P

Cat. no.: DH-0005-0P

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 5-7 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 5S

Cat. no.: DH-0005-0S

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 5-7 dm3/h.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
• First purity class (PN-EN ISO 3696:1999, ASTM, CLSI, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 5SP

Cat. no.: DH-0005-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 5-7 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, ASTM, CLSI, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 5 UV

Cat. no.: DH-0005-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 5-7 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, ASTM, CLSI, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 10

Cat. no.: DH-0010-00

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 10-12 dm3/h.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

 

---

HLP 10P

Cat. no.: DH-0010-0P

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 10-12 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 10S

Cat. no.: DH-0010-0S

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 10-12 dm3/h.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, ASTM, CLSI, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 10SP

Cat. no.: DH-0010-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 10-12 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 10 UV

Cat. no.: DH-0010-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 10-12 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 20P

Cat. no.: DH-0020-0P

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min. 20-22 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 20SP

Cat. no.: DH-0020-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 20-22 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 20UV

Cat. no.: DH-0020-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 20-22 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 30P

Cat. no.: DH-0030-0P

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin.

– Efficiency min.30-32 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI). 

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 30SP

Cat. no.: DH-0030-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 30-32 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 30UV

Cat. no.: DH-0030-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 30-32 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 40SP

Cat. no.: DH-0040-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• carbon filter,
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 40-42 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 40UV

Cat. no.: DH-0040-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• carbon filter,
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 30-32 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 60SP

Cat. no.: DH-0060-SP

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• carbon filter,
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 60-62 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.

 

---

HLP 60UV

Cat. no.: DH-0060-UV

– Fed by tap water.

– Water purification levels:

• sediment pre-filter 5µm,
• carbon filter,
• reverse osmosis,
• double demineralization on a mixed ionex resin,
• UV lamp 254 nm,
• microfiltration cascade capsule 0,45/0,2μm.

– Efficiency min. 30-32 dm3/h.

– Membrane pump is included.

– Demineralized water conductivity < 0,06 μS/cm.

– Two independ water intake points:

• Second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) 
• First purity class (PN-EN ISO 3696:1999, EP).

– Tank 10 dm3.

– Obtained water may be used for instrumental analyses AAS, ICP/MS, IC, HPLC, GC, bacteria cultures, biochemical analyses and for general-purpose research.

– Fed by cold water: 5-40°C.

– Power supply: 230V/50Hz.